If you’re planning a redecorating project, you might be considering faux wood blinds. But, this is easier said than done. If you’ve ever used faux wood blinds before, you know that it can be a little tricky to get the right size. Previously, you were required to measure your window, visit the shop, and get your plastic faux wood blinds cut to size for you. 

And even this was never a guarantee you’d measured it correctly, meaning a lot of wasted materials and plenty of frustration. However, times have changed, and it’s now easy for anyone to find out how to cut blinds to make their home improvement project a success. 

What Is Faux Wood?

Faux wood is a style of plastic wood effect blinds that use polymer materials to mimic the style and appearance of real wood. When it comes to custom fit blinds, this material is easier and more economical compared to custom cut wood, making it an appealing choice for redecorating projects that won’t break the budget.

Also check: Reasons To Buy Faux Wood Blinds

Custom faux wood blinds come in a range of colours to match any decor choice, meaning you can find the right answer no matter what you’re looking for. 

How to Cut Blinds to Size

Before you start to ask where can I get blinds cut to size, you should know that you can do it at home! Cutting Venetian blinds is easier than you might expect as long as you have a blind cutting tool. 

  1. Before you resize blinds purchased, you must first measure the window width in three places – the top, middle, and bottom. Typically, blinds measure about half an inch less than the frame. We recommend measuring multiple times to get an accurate measurement. 
  2. Measure the blinds and mark the required length. It may be easier to cut from just one side, which is opposite to the cords. 
  3. Use a wooden blinds cutter to cut the blinds to the right size.
  4. Remove the metal stiffener faux wood blind brackets from the side you are cutting. 
  5. Make the blinds good by sanding down rough or jagged edges to prevent them from scratching paintwork or catching when lowering or raising them. 
  6. Replace the end bracket 

How to Shorten Blind Cord Without Cutting

A long blind cord can be unsightly and overly complicated. Longer blind cords may not match your custom blind size and can get knotted or tangled, which could affect the blind’s functionality. Rather than use a Venetian blind cutter, though, it is possible to shorten the blind cord without cutting anything and still get the best results. 

There are several options to consider without cutting blinds or the cord itself. Some people will knot the cord in a specific place, usually towards the bottom. However, even this is not always as attractive, especially in areas of the house that see a lot of visitors, such as the living room or kitchen. 

Instead, you can use cord cleats. These accessories allow you to wrap the cord around them at the preferred location, which is the same place you would knot it. Although simple, this is an elegant solution and also allows you to use the full length at a later date if you move house or donate the blinds to a friend or family member. 

How to Fix Broken Wooden Blinds

Broken blind slats can disrupt the tranquillity and convenience of your home, but it is not the end of the world if you encounter a broken blind. Indeed, it is just as beneficial to know how to fix broken wooden blinds as it is to know how to take down Venetian blinds for repairs or replacements. 

Like cutting blinds, you can easily fix broken blinds. 

  1. Use the pliers to pick up the bottom slat and remove the plug.
  2. Pull the cord through each blind until you arrive at the broken blind.
  3. Remove the broken blind and be careful not to remove it too quickly, as it could tangle with other blinds and even damage surrounding blinds.
  4. Do the reserve when installing the replacement blind. Ideally, you have spares ready, but if not, you can research faux wood blinds that match your existing blind style.
  5. Feed the cord through the rest of the blinds and re-attach the plug to keep them in place.

In most cases, you may not even need to know how to take down Venetian blinds before you remove and repair broken window blinds. However, this usually depends on where the broken blind is located. Lower blinds are easier to remove, but any blinds further up the scale may require you to take the blinds down entirely to prevent any frustration or mistakes. 

How to Take Slats Out of Blinds

If you know how to cut down a blind, you should also know how to take slats out of blinds. First, it’s useful to know why you would need to do this. 

Mostly, removing slats permanently is done if the blinds hang too long or bunch up on the windowsill. Some people do not mind this, but others do. If you prefer a perfect fit for your blinds, removing slats is the best approach.

  1. Keep the blinds installed and remove the plugs from the bottom. Here, you will find a knotted cord. Untie the knot to remove the base rail. 
  2. Carefully remove as many slats as you need by feeding the cord through the gaps. This could be just one slat, two slats, or even several. 
  3. Don’t forget that the base rail will also add some length to the blinds, so account for that when removing the slats.
  4. When you have removed as many slats as required, replace the base rail and re-tie the knots. Once you have done this, put the plugs back on. 

We recommend keeping the space slats in case of damage or if you move house and need to lengthen the blinds again to match the window size. 

Custom Faux Wood Blinds

If you’re looking for high-quality custom length blinds, Wood Blinds has a variety of bespoke cut to size blinds for you to peruse. Our website offers custom size options where you can get accurate measurements in multiple units (mm, cm, in) and extra features to make the blinds suitable for any room in your house. Check out our Wooden Blinds Product Page to find out more.